Product Overview
The Schneider ATV340U55N4E is a 5.5 kW high-performance variable speed drive from the Altivar Machine ATV340 series. It operates from a three-phase 380–480 VAC supply and is designed for demanding industrial machinery.
The N4E suffix identifies the embedded-Ethernet version, supporting Modbus TCP, EtherNet/IP and Modbus serial communication. This makes the drive suitable for machines integrated with industrial PLC and Ethernet control systems.
The drive is intended for applications requiring fast acceleration, controlled deceleration, high overload capability and accurate motor-speed or torque regulation.
Main Features
- Exact commercial reference: ATV340U55N4E
- Rated motor power: 5.5 kW
- Three-phase 380–480 VAC supply
- Embedded-Ethernet communication version
- Modbus TCP and EtherNet/IP connectivity
- Modbus serial communication
- Integrated Safe Torque Off function
- High-dynamic machine-control capability
- Suitable for asynchronous and supported synchronous motors
- Designed for demanding cyclic operation
Technical Specifications
| Model |
ATV340U55N4E |
| Series |
Altivar Machine ATV340 |
| Product Type |
High-Performance Variable Speed Drive |
| Power Code |
U55 |
| Rated Motor Power |
5.5 kW |
| Supply Voltage |
Three-phase 380–480 VAC |
| Communication Variant |
Embedded Ethernet Version |
| Embedded Communication |
Modbus TCP, EtherNet/IP and Modbus serial |
| Drive Positioning |
High-performance machine drive |
| Motor Compatibility |
Asynchronous and supported synchronous or permanent-magnet motors |
| Feedback Compatibility |
Verify encoder interface and installed option modules |
| Integrated Safety |
Safe Torque Off; exact safety configuration requires verification |
| Overload Capability |
Application- and duty-dependent |
| Braking System |
Confirm braking resistor, chopper and regenerative-energy requirements |
| EMC Configuration |
Verify installation category and cable requirements |
| Installation |
Industrial electrical cabinet |
Compatible System and Applications
The ATV340U55N4E is suitable for conveyors, packaging equipment, mixers, textile machinery, material-handling systems, woodworking machines and automated production lines.
The drive is particularly suitable for Ethernet-connected machinery using Modbus TCP or EtherNet/IP. Confirm controller compatibility, network settings and communication mapping before commissioning.
Maintenance and Replacement Notes
Verify the complete ATV340U55N4E reference. The corresponding ATV340U55N4 model uses a different Sercos-oriented communication architecture.
Back up motor parameters, network addresses, I/O functions, safety settings, acceleration profiles and firmware information before replacing the original drive.
For used products, inspect cooling components, power terminals, DC-bus components, Ethernet ports and stored fault records.
Related Models
ATV340U55N4 is the related 5.5 kW Sercos-oriented version.
Adjacent Ethernet models include ATV340U40N4E at 4 kW and ATV340U75N4E at 7.5 kW.
Inquiry and Supply Notes
Please provide the complete installed model, motor nameplate, communication protocol, controller model, application duty and braking requirements.
Firmware, options, safety configuration, product condition, availability and delivery time must be confirmed before quotation.
|
|
Schneider ATV340U55N4E ATV340 5.5kW Embedded Ethernet Variable Speed Drive Images
|
